1. Preparation
Cleaning – It is recommended to use LOCTITE® SF 7070™ Cleaner & Degreaser to degrease and clean surfaces prior to applying adhesive. Activation – If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperatures (below 5°C), use LOCTITE® SF 7649™ activator. Allow to dry.
2. Application
Apply a 360° bead to the leading male thread, leaving the first thread free. For bigger threads, apply both on male and female threads.
3. Assembly
Assemble fittings using wrench tightening in accordance with manufacturers’ recommendations.
4. Disassembly
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 500°F/260°C; disassemble parts while hot. For corroded or seized parts use LOCTITE® LB 8040™ Freeze and Release.
admin –
Sản phẩm dùng chất lượng, hàng giao đúng mô tả, shop tư vấn nhiệt tình. Mọi người mua hàng ủng hộ tại shop này nhá.
Mr Tom –
Sản phẩm nhìn đẹp, chất lượng tốt, giao hàng nhanh.
Anh Phong –
Shop tư vấn nhiệt tình, shop bán hàng vui vẻ, giao hàng nhanh, đóng gói đẹp.
Ms Dung –
Sản phẩm dùng tốt, đóng gói đẹp. Sẽ ủng hộ shop lâu dài.